srsRAN_4G

srsRAN_4G copied to clipboard

## Issue Description ## We are trying to use both srsenb and srsue to test our LTE core. However when we try to attach, we fail to set up the...

jamep007

UE sees the eNB but not able to connect

2

## Issue Description ## UE sees the network and shows message Found Cell: Mode=FDD, PCI=1, PRB=6, Ports=1, CP=Normal, CFO=xx(varies). But still the eNB and EPC doesn't show anything about UE....

nits-skydeploy

## Issue Description ## When I use srsUE with srsRAN gnb and Open5GS and I add a PCC rule, the srsUE at NR Connection Reconfiguration finishes with a failure. ##...

AEncinas19

Multiple half-duplex SDRs instead of a single full-duplex SDR?

4

Apologies if this is the wrong place to ask, but is it possible (or, how hard would it likely be) to use two half-duplex SDRs (e.g. 2x HackRF One) instead...

tomdionysus

Registration Request Loop

1

## Issue Description ## [Describe the issue in detail] I want to implement a 5G network using simulated UE. I followed the tutorial and instructions in [https://docs.srsran.com/projects/4g/en/next/app_notes/source/5g_sa_E2E/source/index.html](url), however not using...

ayamoheddine

failures in benchmark_radio for bladeRF 2.0 micro

1

## Issue Description ## Refer to https://github.com/srsran/srsRAN_4G/issues/1247 I have been suspecting Radio interface as issue since I see very flaky and intermittent attach with bladeRF 2.0 micro XA4 with srsenb...

nitinvjain

Error when configuring a band different from n3 in srsUE (5G SA)

3

## Issue Description ## Trying to connect srsUE to 5G-SA srsENB using a FDD band other than n3 but whatever band is selected within the ue.conf file, srsRAN automatically takes...

olasierra

`srsue` attachs to cell successfully, but `sudo srsue` fails

2

## Issue Description ## `sudo srsue` fails to attach to network, but `srsue` succeeds? ## Setup Details ## USRP B200 RF front end magma as open source EPC Baicells Nova227...

wesmwoo

Hi, I am inspecting the 4G sync signals reception. I found the pss_usrp.c test which is exactly the implementation I need to begin with. My test setup is the following:...

nedsana

Issues with Running srsENB on USRP E310

3

 ## Issue Description ## I am encountering a persistent issue while attempting to run srsenb with a USRP E310 device. The process starts normally, but I consistently face a...

alinstoica19