srsRAN_4G

srsRAN_4G copied to clipboard

ARE CELL_SEARCH RESULTS CORRECT ?????????

1

Hello, I am using both bladeRF and USRP SDR. I want to find all cells in my environment. When I use cell_search command, I found many cells but there must...

zapatista06

Unstable network with USRP B200

4

## Issue Description ## I followed the instructions from the COTS UE practical application and UE cannot stay connected for a long time to srsenb, there are fluctuations, meaning it...

alinstoica19

Raspberry Pi5 Build Failure w/ LimeSDR Mini

3

## Issue Description ## Unable to build from source on Raspberry Pi 5 with Ubuntu 23.10 (22.04 LTS not supported) with a LimeSDR Mini 2. ## Setup Details ## Raspberry...

perfectionst

srsran config for support volte

1

Hello. I have installed open5gs tags/v2.6.6 on ubuntu 22.04 and on the same machine have installed srsran for enb. I use the config for open5gs that says in https://github.com/herlesupreeth/Open5gs_Config. what...

faratell

connection between srsue and srsenb only works the first time

1

## Issue Description ## Connection over wire works but only the first time I attempt to connect UE and eNB. If I disconnect then reconnect all future attempts until I...

docfate111

COTS UE cannot see the LTE network

8

## Issue Description ## Hi all, I run sudo srsepc and sudo srsenb, the eNB and ePC are connected but the corresponding network cannot be found using COTS UE (Samsung...

sj5298

## Issue Description ## [Describe the issue in detail] We are trying to produce a simulation of 20 UEs on an eNb or 5G connected to an EPC or 5G...

rninan

COTS UE can connect only to band 5

8

## Issue Description ## [Can not connect a Quectel EG-25G COTS UE] ## Setup Details ## [SRSRAN v 22.4.1, UBUNTU 22.04LTS on Ryzen 7 PC with USB 3.0, USRP B-210....

cyberkul

Hi! Is it possible to connect the pc to another X310 srsRAN base station via USIM card and Quectel module? If this is possible then which model Quectel module and...

plaiddshirt

RACH procedure failed for Quactel module

2

## Issue Description ## RACH procedure failed ## Setup Details ## * srsenb running inside pod and using USRP X310, * UHD version 4.0 * Worker details ```bash CPU(s): 128...

orion-belt