Trefor Southwell
Trefor Southwell
Can you attached the debug yaml for your plan?
Did you mean to close this issue without comment? The code is meant to change between charging and discharging based on the current SOC level, can you share a logfile...
The issue is there is no support charge hold option its always assumed to be working. Can you add a logfile of the problem?
So in the logfile it says '2025-04-05 20:20:03.625381: Current SOC 100% is greater than Target SOC 10. Grid Charge disabled.' At this point it should set timed_charge_current to a value...
If I reverse your load scaling setting (back to 1.0) and re-run your plan then it still says you have plenty of energy left only going to 38% minimum. Are...
Check in Home Assistant how fast the battery actually charges
Oh wait maybe this is the issue: inverter_limit: - 4600 Should be 3600, and maybe battery_rate_max is correct at 4600 when charging from DC?
I helped to change the inverter_limit to 3600 to match the real rate, set load scaling back to 1.1 and best_soc_keep to 3 kWh
Surely this is correct if these values are unknown, have you checked the sensors?
Do these errors not clear after a little while, it strikes me like a reboot issue (Solis not being up yet)?