soxhi8

I will check compatibility for older versions and report back once I know more.

Just in case you need another example, the file in https://github.com/Ultimaker/Cura/issues/12460 exhibits the same issue.

My current workaround is to activate the `Select a container`-option, by removing `hidden` and `disabled` in the DOM: `Select a container`

Thank you for testing my issue. @ildar170975 tested with leading zeros though, and as I noted in my initial report, leading zeros function correctly. `Notice: The error will not occur...

The current frontend also rounds up numbers while entering them: 1. Try to enter 0.2673 2. GUI will round from 0.26 to 0.27 when the 7 is entered after the...

> There are two options to work with non-ASCII characters: > > 1. Use release version v0.10 > > 2. Switch to Python 3 Is Klipper fully supported on Python...

Can confirm the issue for two devices (Android 10), both running DAVx⁵ for contact- and task-sync. OnePlus 3 - LineageOS 17.1 20210203 microG Asus ROG Phone 2 - WW 17.0240.2021.65...

> I don't know why I never merged this, but better late than never, I guess. You were likely waiting for more confirmation on compatibility on older versions of Klipper,...

I can confirm that this is due to broken acf files. Found multiple in my installation that were able to be fixed by triggering a reinstall of the game. Attached...

Still having issues with this, with my Zigbee2MQTT setup and the latest fix version from the forum (https://community.home-assistant.io/t/zha-deconz-zigbee2mqtt-ikea-e2001-e2002-styrbar-remote-control-universal-blueprint-all-actions-double-click-events-control-lights-media-players-and-more-with-hooks/354176/35) and max helper length set to 255. Long press actions do loop,...