slackista
slackista
TMOTOR F7 HD is not fully supported by INAV. Even If you make build yourself, mapping is broken. Ask me what I know 😉
Are there any research going on with this issue?
Just want to simplify this data https://github.com/bitdump/BLHeli/issues/658#issue-1428883343 In mid RPM the torque is ~60% lower than motor can deliver. Another word for the same performance motor should have + 60%...
Blackbox logger that expect data with 2M Baudrate.
Same with 3.13.2
LOL. Filament detection not working at print start. Prusa support 24/365/∞: >Keeping the filament very dry should make a noticeable difference. @jwingenroth which part you don't understand?
MK3 is sensorless homing, correct, use case is about after restart/reboot printer.
+1 Would love to always see screen1 with telemetry when eg. arm is switched.
Build logs. Vanilla Ubuntu24.04.1 [expressslrs-configurator.log](https://github.com/user-attachments/files/17510932/expressslrs-configurator.log)
Any chance to fix this? Local build for LR1121 via Confgurator is broken since beginning.