Scott Bezek

Yeah, I'm hoping this is just a temporary out of stock issue, but the seller actually has another listing that looks essentially identical (though a tiny bit more expensive) and...

Responding from my phone, so pardon the brevity. I don't want to call the project dead quite so soon, but it's certainly not looking very good at all... Regarding other...

Some specs and photo from the inside of the original motor in case it's helpful identifying an alternative:  (for reference, the diametric magnet is a ceramic ring and appears...

Other motors I tested previously and decided against: ### On the left: - 34.5mm OD, 4.9mm ID - U-V resistance somewhere around 30 ohms - too much cogging torque -...

Let us know who you talk to and what you find out from them @C44Supra (hopefully we can avoid having everyone spamming the same suppliers and asking all the same...

I'm waiting on sample pricing for the GBM2606 (though I'm worried that the smaller ID may be too small to accommodate a 3d-printed riser) and GBM2608 (wide enough ID but...

Just for the heck of it, I submitted an Alibaba RFQ with the details and photos of the existing motors (32mm rotor, 6mm ID, 14P12N, etc), just in case the...

I've ordered some samples of the 2608 with ferrite ring magnet (from "Flash Hobby" Huizhou Feishun Technology), asking for a couple 5 ohm and a couple with 8 ohm windings...

@jtsfour thanks for pointing out DC-3514C earlier. The JD-power contact just reached out to me from my RFQ mentioning that DC-3514C and DC-3515C are both similar to what I was...

@tascord yeah, we can make a compatibility table once some compatible motors are found... that remains the challenge at the moment... The VAST majority of readily available BLDC gimbal motors...