Scott Bezek

@caoge12138 Can you share more info, or contact me [email protected] to discuss this seller further? I would love to order samples to confirm quality (and potentially test some different windings...

@Liu-jingyu-CN wow, thanks so much for finding and sharing that - it's very promising. I can't find any Alibaba/AliExpress presence for that manufacturer, so I've reach out via email to...

@C44Supra My DC-3515C samples are in the US but will likely be a few more days until they get to me. Glad to hear they have low cogging. @cgriffin Thanks...

Yeah. Theoretically the MT6701 could also just be mounted off axis and a LUT added to correct for the non-linearity. The LUT should be possible to generate completely automatically during...

Are you thinking JLCPCB or another manufacturer? In theory this shouldn't be too difficult to support since I'm already using KiKit to export the gerbers (I may have to swap...

@jtsfour That's a Lilygo T-Display - it's a great ESP32 board, and there's even a [pio env](https://github.com/scottbez1/smartknob/blob/e35319af6d4223d03087177da39b63936b2836fb/firmware/platformio.ini#L108-L156) set up to use it for prototyping the smartknob as well! (though since...

When I initially set up the project, the stable Arduino core yet didn't have support for using the PSRAM on the ESP32-PICO-V3-02, so that is not expected to show up...

Thanks for the feedback. Would love to find a cheap round LCD with TE available, but so far I have not seen any such display readily available, so we make...

Can you share the debug output from the boot loop when you use Upload and Monitor? That will help pin down exactly what's happening. One known issue is that you'll...

When I first set up the CI pipeline I believe KiBot support for 6 wasn't stable/released. I would have preferred to use KiCad 6 for this project, but that was...