rflulling

Hello all. I understand this is an old post. But it's been left open. I noticed some work being done By BTT on several new revisions of default firmware configurations,...

Attached are the jumper config I meant to attache to the last. *I will have to double check on the Compiled firmware.* This one, although I have a running record...

[driver seat pins SKR PRO.pdf](https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/files/3935226/driver.seat.pins.SKR.PRO.pdf) Not sure how its been over looked. I know it was attached. Sorry it did not get through. Hope this helps. Will try to get...

Ack.... On Sat, Dec 7, 2019, 12:26 PM oldman4U wrote: > Hi. > > No hurry, but the pdf is 6 empty pages. > > — > You are receiving...

Ok, this one works... sorry for the trouble. Realy I am. https://drive.google.com/file/d/1CR7NcZsWs012gB1fWaCSrZSwWh_6bvzq/view?usp=drivesdk On Sat, Dec 7, 2019, 12:26 PM oldman4U wrote: > Hi. > > No hurry, but the pdf...

I cannot upload a fully compiled firmware. Doing so puts me in a vendor position where by the terms of the contract we all agree to, knowingly or not, I...

I did not get the hardware switched for testing but the firmware is branched and passed compile on both version. Ready for the hardware. As stated, I cannot give the...

You must have power to all three sets of power input. They do not have to be the same source. They must be connected and powered on. Jumper in middle...

If the A4988 are not working and we can walk you through proper hardware setup and you have the proper basics set in the configuration. Then you likely have something...

 **Attached are the files I alter.** PlatformIO.ini, is altered for viability, and need, not function. Not changing the PlatformIO.ini with the one I have, will change nothing. Just be...