Alan Weinstock
Alan Weinstock
Currently the ANSI output distorts the image, because each "pixel" is made up of a roughly 2x1 character. Can the ANSI function be edited so that each pixel creates two...
Currently the FFC cable chain only supports Direct Drive extruders (on-head), but it would be fairly trivial to add a second stepper header to the X-Motor board to allow users...
As we're already introducing an MCU nearby the stepper motors, it wouldn't be too difficult to implement a current monitoring circuit that could be tuned to detect stalls and jams....
**Is your feature request related to a problem? Please describe.** Currently the parts library used in this project is attached to my personal Autodesk account, and not publicly accessible **Describe...
**Is your feature request related to a problem? Please describe.** Currently every contributor / user has to set up their own build environment if they want to modify the firmware....
**Is your feature request related to a problem? Please describe.** Currently there is no documentation on the PT100 sensor integration **Describe the solution you'd like** Create documentation for: - PT100...
**Is your feature request related to a problem? Please describe.** Since the beta kits were shipped using bare piezo disks, end-users will need to solder their own wires to it....
**Is your feature request related to a problem? Please describe.** Some users reported confusion as to which orientation of the board is being used when describing features or connections **Describe...
Documents for PCB assembly are needed: - [x] DXF simplified drawing of PCB components, front/back - [x] component type/value list - [ ] recommend assembly order - [ ] PCB...
Migration from AVR to ATSAMD MCU will allow for onboard USB for debugging, firmware update, and parameter configuration, as well as incorporating a vastly increased operation speed, and hardware DAC...