Alan Weinstock

If you can provide some CAD sources for the UM2 or your own printer, that will help speed the design process for this. Underbed is how I would typically approach...

> Will the sensor work if it experiences constant spring pressure? Yes assuming the polarity is correct, you can even pre-tension the piezo and pick up the "relief" motion if...

I had a look, and I'm fairly certain a technique like [this one](https://www.thingiverse.com/thing:4836261) will work for the UM2 I'll get something knocked together when time permits!

The mechanical quality factor on those might be an issue, as I believe these are primarily used for ultrasonic transducers. If I'm making a correct assumption (cus I've never actually...

@svpcom Here's a use-case very similar to the UM2 that's utilizing my SingleDisk adapters:    I don't think the UM2 has any other mounting holes adjacent to the...

Started working on this, and it looks like there *are* mounting holes I can utilize on the UM2! What I don't know is whether they're threaded or not.  Can...

do you think they could be used with a nylock nut on the other side? Alternatively, I could design a mount intended to be used with some 3M adhesive tape...

Okipokey, I'll see what I can come up with, thanks for all the feedback!

👍 Will get documentation written once I have a chance to review with one of the beta testers who uses RepRap

I don't currently have a reprap capable printer to test and make instructions with, but I'd be happy to include documentation if I can get some details about setup from...