Alan Weinstock

It can be used as a probe as well, you just won't be able to configure the sensor's settings through Klipper till they add support for that. This is veering...

@Zero-Grav please edit this request and fill out each section fully

@Zero-Grav please edit this request and fill out each section fully

Thanks for putting that request in! I've already started working on an under-bed solution for this printer. It will require adding a "padding" material between the bed plate and the...

I've added a rubber grommet as well as a small printed piece to assist with actuation:  

@notacoat I realize you'll probably need boards to test this integration method. Are you comfortable coordinating over Discord for that? Do you want to procure your own boards or have...

@notacoat awesome, thanks for the tip!

@ETE-Design Any chance there are sources or models for the gantry carriage? If not, I'll need to get one or have you take measurements (or make a dummy model if...

@ETE-Design The boards are still very much in beta, so if you don't mind working with an unproven board, I can work that out with you. DM or @ me...

First draft of the mount for this model has been posted: https://a360.co/34VN7gC