[FR]Reprap 2 and 3 Configuration

[Afteraffekt]

Rerap 2 and 3 firmware configuration data missing.

[pyr0ball]

👍 Will get documentation written once I have a chance to review with one of the beta testers who uses RepRap

[Tinchus2009]

Any update on this? I use reprap 3.X and I would like to have this docs

[pyr0ball]

I don't currently have a reprap capable printer to test and make instructions with, but I'd be happy to include documentation if I can get some details about setup from someone who uses it more regularly.

One of my beta testers provided a little snip he used to set up his ezpz:

;M558 P8 F4200 T7000 H10 I1                                  ; Z probe type to PIEZO and the dive 

[gueee]

Here's my config running on the following hardware/firmware: Board: Duet 2 WiFi (2WiFi) Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0 (2022-03-15) Duet WiFi Server Version: 1.26 ; Z-Probe M574 Z1 S2 ; Set endstops controlled by probe M558 P8 C"!zprobe.in" H3 F2600 T9000 ; Set Z probe type mini ir sensor G31 P500 X0 Y0 Z0 ; Set Z probe trigger value, offset and trigger height M557 X25:275 Y25:275 S50 ; Define mesh grid