prusa3d-bb

Hello, Do you have an order number and a picture of the issue, please? Best regards, — Marina Curzi Customer Support PRUSA Research +420 222 263 718 +421 220 570...

Hello, Thank you for your email. Unfortunately I could not open the picture. Best regards, — Marina Curzi Customer Support PRUSA Research +420 222 263 718 +421 220 570 305...

Hello, thank you for this information. We'll get on it as soon as possible. Best regards, — Jennes de Schutter Technical Support PRUSA Research +420 222 263 718 +421 220...

Hi there, so this seems to be more of a bug as we don't see any reason for this and this change has been done a while ago so would...

Hi there, i cant say for sure as i dont have this information but with the whole new Y-frame this should be solved yes on the new MK3. Best regards...

Hi there, thank you for your message. It's possible, that you had some kind of old type of filament holder. At the moment we have a really good type of...

Hello, could you please confirm if this still occurs with the fan check off as the upgrade should not cause any noise in the fan. Best regardsDouglas Whyte Customer Support...

Hi there, you might want to check the zipties are not pinching the wire causing this as this is possible as i assure you we have done this update on...

Hello, so are you still getting the noise on the fan then ? Best regardsDouglas Whyte Customer Support PRUSA Research +420 222 263 718 +421 220 570 305 188/7a Partyzanska,...

HI there, ok i see if its better for you this way no problem but does seem a bit weird though. Best regardsDouglas Whyte Customer Support PRUSA Research +420 222...