Peter Feerick

Are you doing a clean build when switching back to main/2.11? i.e. so that no QT6 paths are being cached in cmake configuration files? They should be installing into different...

@TTGG4400 Might want to double check where you posted this... this isn't the EdgeTX issue tracker ;)

Will add a commit for Companion also. Is there a PR/instructions/binary for EL18 ELRS that you can link to in first post?

More likely 2.10.3. It still needs Companion side-support else will most likely be changed every time you use Companion (as well as not be selectable as an option in Companion)....

One reason is because you never had the tests running before for this handset. Can't check the test output ATM so not sure if it is still that or something...

Three failures I can see straight away... - simu/switch_driver.cpp:40 fails `assert(swtch < switchGetMaxSwitches() + switchGetMaxFctSwitches());` These two fail due to there being no switches made available to Lua, and it...

Was the internal module not working prior to that logic fix? As I was trying to get a previously working receiver with the nb4 yesterday, and having no luck :(...

Ah, ok, I missed that bit 😆 Wasn't interested in ELRS on this just yet... as was expecting this to work with the stock internal RF first and foremost... so...

Does this radio have a trainer port? As trainer thinks it can show master/slave jack settings. Do the trim hats have anything more than the up/down outputs (electrically) - one...

- Bootloader - you use the two buttons on each side the centre grip - SW1/SW2 - bad or missing data - is the SPI flash formatted? - T3 should...