Peter Feerick

Love you work mate. Downright annoying stuff couldn't be moved to a second UART so modbus could have it's own dedicated channel. Do you think it's worth moving the 'debug'...

Serial.swap() should move the Serial endpoint to GPIO15, GPIO13, which as you say, are not connected to the USB TTL chip, meaning that communication with those pins won't overlap. But,...

Sure... I just pushed it onto github as I already have it on my local git server. You can see a screenshot of the current dashboard... the code is still...

Thanks. :smile: Logging will happen (was actually one of the main reasons I wanted to tap into the Tracer RS485 bus), although I'm tempted to do it to a microSD...

Indeed. That will be a long term goal, with define flags to enable it ;) I've now got all the rated data, realtime data and statistical data being read and...

Just tested the Arduino 1.6.6 2015/06/23 05:51 hourly build, the exception message is gone, but now all that happens is the status area says 'Uploading to I/O Board...' - it...

I've just tried again with the latest hourly build, please ignore my previous message about it the message going away... with Hourly 1.6.6 2015/07/03 10:41 it is still there... I...

I think the issue is in the Arduino IDE, as when I open the ports menu the first time after opening the IDE (v1.8.8) on linux, I see four of...

Separate issue opened for those boolean parameters. A warning ~would be good~ is basically mandatory, as I just realised it strips *all* comments, not just the inlines I was using...

Hm... it's last release _was_ in 2016... but there are commits through 2018 and 2019... still doesn't seem to be that actively supported. :cry: In a word... frack. Warning it...