peijunh
peijunh
@donn I have already run the flow. should I provide the resulted gds? or provide the log file?
The run file is large and cannot be attached directly even after compressing. So I upload it in my github and please go to there to git clone it. The...
@donn @rovinski Hi, may I ask the status of your review? Thanks.
I just link the design and update the template @donn . Please check if I need to do anything else
@vijayank88 Thanks for your help. I set :env(GLB_RESIZER_TIMING_OPTIMIZATIONS) to 0. I try to set PL_TARGET_DENSITY as 0.7, 0.55(default), 0.4, 0.35, but they all give me routing congestion too high. So...
Looks like setting the PL_TARGET_DENSITY to 0.2 will help to the congestion problem. But there is problem in the triton route ``` [INFO DRT-0076] Complete 100 pins. [INFO DRT-0076] Complete...
Hi, attached is the compressed file of my design, you can directly put it under openLANE_flow/design/ and run I think. I use the netlist that is flattened by yosys because...
@donn Hello, may I ask do you have any chance to look into this? Thanks.
I clone OpenLane and build it from scratch. My commit now is shown below. ``` commit 27752ec11a12afa3214f64401662683f081e2644 Author: Openlane Bot Date: Wed Sep 29 22:03:01 2021 +0200 [BOT] Update openroad_app...
This is the design file [opentitan_soc.tar.gz](https://github.com/The-OpenROAD-Project/OpenLane/files/7279963/opentitan_soc.tar.gz)