pascallanger

Ok, does your TX has an external module or internal?

Hi, without having access to the TX and quad this is going to be difficult. If you send me one or sponsor me to purchase one I'll have a look....

This is totally possible. The DIY module PCB has been designed with this in mind providing a connector with a full SPI bus + power supply. I remember that the...

Good job. I don't think 20ms is going to be enough to make tests. We need a couple of seconds at least so you have the time to move a...

The IRX4 is a good one since you have an extra SPI port with pinouts available on the PCB just for this exact purpose. So it should be quite easy...

You need OpenTX 2.3.5 or more to go past the protocol 63 and use multi names... Please use the entry 65, since I'm using 64 for the latest FrSky X...

I've modified your code, validation and updated the documentation in my last push. Can you verify that everything is still ok? I'm puzzled by the channels. This protocol looks to...

I've modified the code. By default it's now sending 16 channels and using subprotocols you can switch to 8 channels. It shouldn't change anything on your 1-8 ch PWM outputs.

> Great job! About the hardware design, anyone has making a new version to accomplish SX127x chips? All DIY and iRangeX modules and may be some others have been built...

To receive bind packets, set the sub protocol to 1Mb and the RF channel to 2. The module will try to receive packets from there. Then power on the TX...