Bind with new Cheerson CX10 from 2020 fails

[marph43]

Dear all I recently purchased a new Cheerson CX10 and tried binding it with the Multiprotocol-TX-Module of my Jumper T12. I tried every CX10 model setting I could find, but so far no luck with binding. Is it possible that they changed the protocol again or am I doing something wrong? The PCB is blue and has "WOJ-MINI-10RX" and the date 05/28/2020 written on it. I updated the stock firmware of the Multi-Module to the following version: multi-stm-serial-aetr-v1.3.2.30.

[pascallanger]

Let's try first to bind your CX10 with an old version of the FW like: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases/tag/v1.3.1.78

[marph43]

Thanks for the quick answer. I just tried your proposal. But no luck either (at least not with the "Blue PCB" setting).

[pascallanger]

Ok, does your TX has an external module or internal?

[marph43]

External. JP4IN1-SE

[marph43]

Can I provide any help or additional information to get this to work? Is the cause of the problem maybe the version of my OpenTX firmware? Or do I maybe not to reset the EEPROM? Here is what happens when I start the bind process: It keeps on beeping (beep-beep, pause, beep-beep, pause etc.)

[jxweric]

Hi, I'm using the Cheerson CX-10 with blue PCB for a school project. We are designing our own controller. We are transmitting the bind signal with a nRF24L01, but failing to bind to the drone (similar problem as described above), can you please help me with it? Let me know if you need more information from me!

[pascallanger]

Hi, without having access to the TX and quad this is going to be difficult. If you send me one or sponsor me to purchase one I'll have a look. Pascal

[vyoufinder1]

I'm having the same problem. My orange CX10 won't bind. Any updates?