pascallanger

You haven't changed the RF channel to 2 (Channel=0,0x00) which is why there are so many bad readings. But anyway I have what I need. Let's see if I can...

The biggest problem I have at this stage is that all sub_protocols have been used for this protocol. I need to create a second entry...

If you power on the TX first and do throttle up and down. Wait a minute then power the plane. Does the plane works right away or you need to...

``` "The byte[5] description looks a bit weird to me. Can you explain how the trim behave? Since on the other channels trim 20 means centered but for this one...

I've got a code nearly ready which is waiting for some of your answers from above. I've modified MT99xx so much that I'm crossing fingers that I haven't broken anything...

> > You haven't changed the RF channel to 2 (Channel=0,0x00) which is why there are so many bad readings. But anyway I have what I need. Let's see if...

> Here are the values for aileron trim/mode switch combo: > > byte[5] beginner mid expert > > ail trim min (left) 3F 7F BF ail trim mid 20 60...

I haven't tested anything but you can try to install this firmware: https://downloads.multi-module.org/latest-test/ Then test with the protocol MT99xx2/PA18: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#MT99XX2---92 Please report.

If you have a second radio that could help.

Oh I thought you had another original radio... Doing a dump from what I'm doing won't help me... I've pushed 1.3.3.9, the build is ongoing, wait 5 minutes before redownloading...