nProbe
nProbe copied to clipboard
ntop
Open source components and extensions for nProbe
Hi, Using ntopng -i eth0 I can see the operating system of hosts. With nprobe + ntopng I do not get the O.S. Is there a% flow that sends this...
In case of asymmetric traffic, it might be important to mask collected flows as if they are collected from the same probe that for topological reason is partitioned in multiple...
In collector mode nProbe should - account and dump with -b 1 not just the processes traffic but also the unsampled traffic as observed by the probe (e.g. sFlow and...
Please, add additional **format option** to export IPs (IPV4_SRC_ADDR, IPV4_DST_ADDR etc) to file in **decimal** format (not dotted). For example, it might look like this: `--dump-ip-format ` where _format_ is...
When specifying multiplue input interfaces Cento will create balanced egress queues for each interface. It would be nice to be able to create a set of balanced queues for the...
current behavior: - [--in-iface-idx|-u] fills INPUT_SNMP with the last two bytes of the MAC address of the flow sender. - [--out-iface-idx|-Q] fills OUTPUT_SNMP with the last two bytes of the...
Hello, I am writing because the system returned the following error after running **apt-get upgrade** command on the machine where is installed nprobe (version 10.0.221005) Setting up nprobe (10.0.221005-7857) ......
Hi there, I'm testing a solution by running nprobe to read packets from a local interface and pass the flows to ntopng. In my test setup, both nprobe and ntopng...
Can we dynamically connect our custom version of nDPI with nProbe enterprise? If no then suggest any work-around for this. thanks alot.
I have some problems with the nprobe. One is that the option --pcap-file-list was ignored. I'm so confused after reading the document and the help tips. The document shows that...
