ndeadly

Ok cool, leave it to me and I'll fix it for my controller firmware and work backwards from there if problems are still being reported on earlier firmwares.

Just checked my controller and I'm on version 0282. I modified my code to cycle through the different player LED bitmasks from 0x00 -> 0x1F. Previously, each bit corresponded to...

@laurinneff I have updated the code to check the firmware version and do the best we can to mimic the switch player LEDs with the available choices. @Hydr8gon could you...

@Hydr8gon yeah, you're right - off-by-one error. My bad! Try this one. [MissionControl-0.7.0-dualsense-bcebf08.zip](https://github.com/ndeadly/MissionControl/files/9157638/MissionControl-0.7.0-dualsense-bcebf08.zip) Any thoughts on the LED patterns? Keep the old Switch-like pattern for firmwares that can support it,...

Try charging your controllers. I have had several similar reports lately and in most cases the issue has turned out to be low battery.

It's worth a try. I always test my releases on the most recent firmware at the time. Although all firmwares should be supported, the further back you go the less...

@reichembach and you've tried charging the controller?

> > @reichembach and you've tried charging the controller? > > I don't think it's a battery issue.. (at least for my side) > Temporary fix is using a older...

There's no easy way to check at the moment, but your atmosphere version might hint and which version you have based on what can work with it.

> Tried 0.6.4 but it crashes atmosphère, probably cause that mission control version doesn't support latest firmware. Yes, you would need to downgrade Atmosphere to a lower version in order...