open-source-rover
open-source-rover copied to clipboard
nasa-jpl
A build-it-yourself, 6-wheel rover based on the rovers on Mars!
The ref code column for row 134 (drive motor) needs to be e49 and not e46, because e46 is a different motor
This was brought up on Slack
Figure out what standoffs to actually use for the PCB, and update the BOM and pcb build readme Let's go with all metric, to make things easier for the future
Working to remove remaining todos in the pcb readme for v2.0.3. Also moving all files over to Kicad 6.0, because https://github.com/nasa-jpl/open-source-rover/pull/427 already started that process Note that I'm working off...
It would be better to use the control board ref designators as the "Customer Reference" field for the digikey BOM so that when the ordered parts show up we know...
Finally add the proper documentation for control board part references to the repo. Also fixed a couple small todos in the readme file for the pcb - reviewed section numbering...
Instructions in [pcb build](https://github.com/nasa-jpl/open-source-rover/tree/master/electrical/pcb#33-solder-resistor-r1-and-power-diode-d1) reference things like 'diode D1' and 'resistor R1' but those are nowhere to be found in the repo. They should be specified. In the meantime, the...
I found a typo in the parts_list.csv file, lines 54-59. The short name might be modified to match the correct long name.
