Lukas Chrostowski

Silicon Photonic Device Design Competition

59

 ## $3,000 Elenion Silicon Photonic Device Design Competition [SiEPIC](https://siepic.ubc.ca/) is hosting a design competition sponsored by [Elenion Technologies](https://elenion.com/) with a...

Additional verification rules - opt_in label check

1

- check if all unique label - check if the label comply with standard opt_in_TE_1550_device ... - check if TE label is inside a TE GC cell, and TM inside...

Update all components to support TE, TM or both polarizations, for any centre wavelength, using the automated CML generation via FDTD. Add to each component: - pol: 'TE' or 'TM';...

A request to implement a Layout PCell + CML for a fully-parameterized directional coupler for pulley-coupled resonators, with the following parameters: - g: gap - rr: Radius of the ring....

Directional coupler PCell

1

We have a CML for the regular DC, namely ebeam_dc_te1550, but we don't have a KLayout PCell. Xu implemented the CML, so you can check with him for parameters, FDTD...

- check if LIB NAME = mentor.db. If so, issue warning that it wasn't created by KLayout. How to get the LIB name? http://klayout.de/forum/comments.php?DiscussionID=445&page=1#Item_5 - Check if there are any...

A request to implement a Layout PCell + CML for a fully-parameterized directional coupler with the following parameters: - g: gap - r1: Radius 1 - r2: Radius 2 -...

- Add a model output annotation to show kappa, t and loss at 1550 nm, in the icon for the DC, in INTERCONNECT CML