kasatka60
kasatka60
Couldn't start with these parameters: gst-launch-1.0 -v v4l2src device=/dev/video2 ! video/x-h264,width=1280,height=720,framerate=30/1,stream-format=byte-stream,profile=baseline ! rtph264pay ! rtph264depay ! avdec_h264 ! autovideosink.
Have you checked it on PC? I tried to run it on raspberry pi openhd 2.0.8
asus tinkerboard debian gst-launch-1.0 -v v4l2src device=/dev/video4 ! video/x-h264,width=1280,height=720,framerate=30/1,stream-format=byte-stream,profile=baseline ! rtph264pay ! rtph264depay ! avdec_h264 ! autovideosink latency ~150ms openhd 2.0.8 air: pi zero ground: pi 3b+ USBCamera="usbreset 1d6c:0103; sleep...
Does your camera start normally on raspberry pi openhd? To start the camera, I need to reconnect the camera power.
In 1080p the video is freezing. In 720p, sometimes it freezes. In 640*480 there are practically no friezes at all. Do you have any tips? I tried to change pi...
In "inav lua telemetry" menu up and down buttons are mixed up.
jumper t-lite has the same problem.
How can I change the source code myself to fix it?
Before loading the parameters, I disconnect and connect the camera and then it works. https://youtu.be/HQpuXlulPCQ