kasatka60

OpenHD 2.0.8 Buster air: pi zero +runcam webcam ground: pi 3b+ 5inch lcd inav 2.6 mavlink When arming, inav does not send the coordinates of the point to the launch....

Jumper T12 Pro, Jumper T-lite

3

Jumper T12 Pro, Jumper T-lite, opentx 2.3.14 Inav lua telemetry (https://github.com/iNavFlight/OpenTX-Telemetry-Widget) Up and down buttons are confused in the menu. Is this Inav lua telemetry or opentx firmware bug?

Runcam Webcam don't work

1

air: Pi zero w usb hub AR9271 (https://aliexpress.ru/item/5V-AR9271-AR9271L-150M-wireless-network-card-Secondary-development/32971875623.html?spm=a2g0s.9042311.0.0.264d33edyuaEUH) Runcam Webcam ground: Pi 3b+ AR9271 openhd 2.0.8 Buster Create air.txt SecondaryCamera=USB IsCamera1Enabled=1 IsBandSwicherEnabled=1 USBCamera="usbreset 1d6c:0103; sleep 3; gst-launch-1.0 v4l2src device=/dev/video0 !...

Menu navigation buttons t12/t-lite

2

Jumper T12/t-lite edgetx 2.8.1 [OpenTX/EdgeTX BW LCD Radios version 2.0.0 beta1](https://github.com/yaapu/FrskyTelemetryScript/releases/tag/OTX-ETX_BW-LCD_ver_2.0.0_beta1) Menu navigation buttons messed up.

Jumper t12 pro, edge tx 2.9.0, happymodel elrs 868mgz (https://github.com/ExpressLRS/ExpressLRS/pull/2305), inav 6.1.1. (X-plane 11) If the course is from 180 to 360, then for some reason it adds ~15 degrees...