MegaCommand_Design
MegaCommand_Design copied to clipboard
jmamma
MegaCommand MIDI Controller
Hello, i was handed a "broken" MegaCommand device and just started to do some basic reflowing of the solder joints. After running a few of the testing firmwares successfully, it...
  Hi :), I’m just flagging up that my megacommand keeps getting stuck on peering when it’s connected to the MD mk2. This is despite all tests passing and...
Hi, opening this issue after asking for help over at elektronauts after running into some issues as a possible consequence of the (classic?) mistake of soldering the oled before the...
Hi, i have a unit that has given me a lot of headache, Sold it to a guy who cotacted me since he had trouble. It was working perfect when...
Hi Justin- I have moved this issue over from the Elektronauts forum. I posted there last week about having issues with the MIDI ins and outs of my MegaCommand build....
Hi, All was fine with my MCL 3.10d until the SD card has been broken in use. Can't repair it with disk utility. Since i have a new SD card...
Didn't know that the switch is designed to host an LED in there:  So in theory we should be able to get 4xLEDs on the board but maintain compatibility...
I'd like to print a few official cases and knobs, any recommendations here? I see there are two versions (tall/short). Also, very cool to see the knob getting modeled! Wonder...
I propose we standardize the extension port communication protocol. These are the pins exposed through the two expansion ports:  - Power - Two serial ports (UART0, UART3) - SPI...
The second time I tooke an empty board, solder all the pins only to find I've done it on the wrong side (facepalm)