MegaCommand_Design icon indicating copy to clipboard operation
MegaCommand_Design copied to clipboard
verified publisher icon jmamma

PROG NOT COMPATIBLE

Open albadort76 opened this issue 4 years ago • 6 comments

Hi, All was fine with my MCL 3.10d until the SD card has been broken in use. Can't repair it with disk utility. Since i have a new SD card 16go FAT 32 formated, i try to create empty project just to check if it's working (without the MD connected to). Some of the project created are working some others are "NOT COMPATIBLE" project. For this kind of files, during the creation process, MCL shut down and restart before the end of the process. I think i have a problem around the SD card somewhere, before this all was working good...

albadort76 avatar May 03 '21 15:05 albadort76

After several tests it seems to work again! Connection issue?

albadort76 avatar May 03 '21 17:05 albadort76

Sorry. I thought I replied. The issue could be a connection issue with the SDCard holder. Maybe a bad solder joint?

Depending on your soldering skills, and soldering iron, it is possible to reflow the SDCard holder pads with the screen still in place.

jmamma avatar May 05 '21 10:05 jmamma

No problem! Hopefully got a good soldering iron with a very fine head so that's exactly what i have done on many solder points & all is fine now with the new SD card. Hard to find them under 32go now, maybe some day all this space will be useful (WAV!! :)) ? I'm working on a new track i let you know. Cheers

albadort76 avatar May 05 '21 17:05 albadort76

@albadort76 have you had any additional problems with the SD card since your last post?

jmamma avatar Jun 17 '21 05:06 jmamma

No more problem with the new sd card after reflewing solder joints.

albadort76 avatar Jun 17 '21 06:06 albadort76

Good to hear. I gave the SD Card code a once over. Found some scenarios where reads could be unreliable. So that will be improved in next version.

jmamma avatar Jun 17 '21 06:06 jmamma