bdring

I started a [new issue](https://github.com/bdring/midTbot_esp32/issues/2) to discuss sourcing the switch. @jjgerber01

You can use either type. They can be inverted in the software by sending $Limits/Invert=On or Off https://github.com/bdring/Grbl_Esp32/wiki/Settings#limitsinvert-or-5---limit-pins-invert-boolean

It does not matter where the machine 0,0 is, but positive Y should move towards the center and positive X should move to the right. You can then manually jog...

Grbl_ESP32 supports custom tool changes. If the user supplies functions to handle the custom motion, it will run those functions when the Gcode includes tool change information. The Atari plotter...

Here it is.

I uploaded the source files and gerbers. I am sorry about the shipping cost, but I am only shipping via Priority Mail during the pandemic. The other methods are taking...

Thank you for testing these parameters. Some items can easily be changed. Others are more difficult. Most buffers have an index variable that is tracking position in the buffer. In...

Can you send a photo of your controller and a schematic?

Yes, please send `$localfs/show=config_02.yaml` to show the exact contents of the file. What text editor are you using. It is best to use something that can validate and colorize yaml...

Try uploading again and immediately checking it.