huffeec
huffeec
I think the battery is the same as the shuttter fobs from downstairs. If it is there are replacements in the basket of batteries.
Tower base 3 started with 0.06mm / 30% / 200°C
Are you certain it was the bed that slipped? Do we know what caused it? A quick look at the printer and the x axis belt is quite loose, could...
Possible related to #2069 The first calendar on https://doesliverpool.com/events/ has only a subset of events booked in. Eg the event on 30th is missing. This has caused confusion for people...
@helicalbytes used the iron at makernight and noticed the cord reached quite a high temperature after not much use. It worked ok and they turned it off as soon as...
I've written three temporary fobs visitor_temp1, visitor_temp2 and visitor_temp3 so we have some for now. They are on borrowed Makefest lanyards to make them harder to lose. They are in...
I looked at this with @magman2112 and the bearings for the y axis are in need of a good clean / replacement.
Trying the file `CCR6SE_3DBenchy.gcode` from the Octopi server doesn't recreate this problem, the machine is printing fine. What was the file you were having problems with?
I have reflashed the firmware in case there was an issue, printing from Octoprint with a file prepared in Cura works fine. Although I suspect the credit should go to...
I've spoken to her again and she's happy to do more on this. Trying to convince her to come on Saturday too.