huffeec
huffeec
Inspired by Adrian discussing experiments in electron flow in twisted pairs, I'm convinced this is suitably Physics. Happy to match Helicalbytes. On Thu, 7 Dec 2023 at 20:07, helicalbytes ***@***.***>...
The lift is fixed and we no longer have this space so closing.
I spoke to @magman2112 who found the problem with the old PC and fixed it. I've move the table up from downstairs and connect the old PC, and reconnected the...
In fixing Prints Adam we now have a suitable Olson block and a spare extruder for this printer. They are in the box inside the printer for now. The bed...
Looked at the bed at makerday today. The bed works fine if it is wired in but not put in place. As soon as the bed is put back the...
Adding an update to this because I was asked about it and because the newer Ultimaker has displaced Felicity in the cabinet of printers, but it should still be repaired...
Prints Adam has the latest firmware Cura v5.3.1 as part of #1813
Bumping the 'Add to wiki' element of this. A workshop user today was having difficulty finding somewhere to plug it in. The four way socket used for the pumps has...
O rings arrived and fitted
 This issue was reported again today, just documenting here ftr