hapklaar
hapklaar
@Rem0o Good news, I have had no detection issues when waking from sleep since updating to v121. Also no issues with external source notifications for me. fyi I do still...
@Rem0o It's looking good. As long as I use a +-30 sec delay, no more issues for me.
@Rem0o the issue seems to be back, at least since v133 but also in v134. Has anything changed that could cause this?
@Rem0o Is it possible there has been a regression again? Most of the time when resuming from sleep, I need to refresh 5-10 times before all sensors are detected again....
@Rem0o Hmm curious... any debugging or log checking I can do to try and determine the cause? I don't see anything relevant (or recent) in the error log.
Interesting. By the way the same issue occurs when using the 'official' klipper enabled fw from BTT. I also posted this here: https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware/pull/1913#issuecomment-897653029
The B1 uses a standard SKR 1.4 mainboard, but the TFT is slightly different and specially made for the B1. It also requires a firmware compiled specifically for the B1....
> Good luck, I hope this will fix the problem :) Reporting back; had no effect unfortunately. Is there anything else we can try?
How can I do that? Is that an option in klipper's printer.cfg?
I don't notice any difference in behavior when using other speeds. Tried from 100000 to 4000000 like this: ``` [display] lcd_type: emulated_st7920 spi_software_miso_pin: EXP2_1 spi_software_mosi_pin: EXP1_3 spi_software_sclk_pin: EXP1_5 spi_speed: 100000...