hapklaar

Can confirm, board looks identical to the left pic with the zero ohm resistors on QSPI. If there is anything I can try or test please let me know!

Curious if anyone was able to make some progress on this?

That's very promising 👍 Unfortunately it fails to compile on the spi part. Any idea what the issue could be? ``` INFO ESPHome 2024.1.0-dev INFO Reading configuration /config/esphome/t-amoled.yaml... INFO Generating...

Thanks @clydebarrow Great success! This screen is so pretty...  PS fyi, only issue with the code is that the logger component won't compile for some reason. Had to comment...

FYI: I added the ESPHome (dev) add-on to my HAOS machine. That created a new docker container in which I cloned Clyde's amoled branch. Then went to the Web UI...

> Got a S3 amloed but having a hard time finding the aforementioned branch... Anyone care to point me to it? Here you go: https://github.com/clydebarrow/esphome/tree/amoled

Certainly. I use a beacon probe by the way, probe_points: 200,200,20 3 consecutive results:   

Sure, is this what you mean? ``` [16:58:31][VV][atorch_dl24:153]: Notification received: FF.55.01.02.00.00.0B.00.03.E8.00.00.5A.00.00.00.00.00.00.00.00.00.00.00.00.1A.00.00.00.00.3C.00.00.00.00.FB (36) [16:58:32][I][atorch_dl24:265]: Status report received [16:58:32][D][sensor:093]: 'atorch-dc-meter voltage': Sending state 1.10000 V with 2 decimals of accuracy [16:58:32][D][sensor:093]: 'atorch-dc-meter...

Sure, here you go   Too bad it seems I might have an older fw as it doesn't seem to be upgradable. Menu says it's a DL24M ver2.0

Its also empty for me, via code it works.  Nothing in the debug log in the browser as far as I have seen.