Jeff Geerling
Jeff Geerling
Thanks for clarifying that! I guess we should update the name on the site, then, and also add a reference to both locations in the description.
Original URL was: https://pipci.jeffgeerling.com/boards_cm/cm4-cluster-mini-itx.html New URL is: https://pipci.jeffgeerling.com/boards_cm/deskpi-super6c.html
@drifterdave - I'm printing the shield as we speak (STL file attached). I'll let you know how it lines up! [DeskPi_Super6c_IO_Shield.stl.txt](https://github.com/geerlingguy/raspberry-pi-pcie-devices/files/9222924/DeskPi_Super6c_IO_Shield.stl.txt)
@drifterdave - It's close but needs more tolerances; on my board one of the vertical HDMI ports is slanted a bit, and otherwise, almost everything looks like it needs to...
@icaesarv - Working on that currently ;)
> Hmm very interesting, on my board the power jack is much closer to the edge than it seems yours is, I actually measured off the board as opposed to...
Working on a cluster configuration here: https://github.com/geerlingguy/deskpi-super6c-cluster @drifterdave - After four iterations, I have the ports all lined up:  Here are the relevant files: - [DeskPi_Super6c_IO_Shield.stl.txt](https://github.com/geerlingguy/raspberry-pi-pcie-devices/files/9243924/DeskPi_Super6c_IO_Shield.stl.txt) - [thin_ITX_IO_Shield_Super6c.scad.txt](https://github.com/geerlingguy/raspberry-pi-pcie-devices/files/9243925/thin_ITX_IO_Shield_Super6c.scad.txt)
@nezra - That seems... surprising. If 5v, it seems like at least it wouldn't blow anything up, but it still is weird to use that connector but not the standard...
You would need to connect power to the power header on this board (but see @nezra's comment above).