Jeff Geerling

If you have the Pi plugged into an HDMI display, do you see anything at all on the screen when it boots? Any kernel panic or anything? If there is...

Not a bad idea—though I do have everything categorized on the site itself: https://pipci.jeffgeerling.com

Besides general performance, I'd also like to discuss booting off an NVMe drive—specifically, since direct booting from one is not supported, how do you get the Pi to initialize off...

@Magnum-Pl thanks for sharing. Weird that the 980 would behave any different. Did you confirm it works in another computer or USB adapter? Also, what capacity is it? I've only...

@ThomasKaiser - Just noting here (also noted in another issue) that I updated the disk-benchmark.sh script quite a bit, to use much larger sequential size for the testing, and a...

@Johnnie390 - FYI the 980 Pro is a bit newer and maybe there's some limitation due to that? I've only tested up to the 970 (which did work).

I'm using the same branch from @Coreforge for 5.10.y / AMD Radeon that he's testing on the 6450 and I've also tested on my 5450. `startx` results in a working...

GLMark2 (`glmark2-drm`) ran all the way through—a task I've been unable to complete on my 5450. ``` ======================================================= glmark2 2021.12 ======================================================= OpenGL Information GL_VENDOR: X.Org GL_RENDERER: AMD CAICOS (DRM 2.50.0...

Something else to test (when I get a chance)—Coreforge mentioned that the following `cmdline.txt` was necessary to prevent early crashes: ``` console=serial0,115200 console=tty1 root=PARTUUID=5dac9010-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait radeon.uvd=0 maxcpus=4...

Over on Twitter, [Juuso Haavisto asked](https://twitter.com/osnnr/status/1519320126390157313) if Vulkan is working. I ran: ``` sudo apt install libvulkan1 mesa-vulkan-drivers vulkan-tools ``` And after that, I can run `vulkaninfo`: Click to expand...