Dirk Eibach

I have documented my modifications here: https://zeromips.org/posts/2022-05-29-5a-75b Involves flex PCB as well as SN74CBT3245APW.

Is there any chance to get this merged?

> This controller firmware should theoretically work with all Model M122 keyboards, right? It looks quite similar, so it should probably work. But you cannot be sure about the matrix...

> But I will certainly add a solenoid to my board... For the sound? This thing is already loud enough for my personal taste, more than loud enough for my...

And certainly nobody really needs these LEDs, I just needed an excuse to play with an OLED.

> Where did you buy the OLED display and how much was it? (I'm German, too.) I think it is this one: https://www.amazon.de/AZDelivery-Display-Arduino-Raspberry-gratis/dp/B01L9GC470/ref=mp_s_a_1_1?dchild=1&keywords=AZDelivery+128+x+64+Pixel+0%2C96+Zoll+OLED+I2C&qid=1612819865&sr=8-1

Ok, got it. It's all about using "rb" in fopen() which leads to windows line endings not transformed, which results in strtok() doing the wrong thing. Should I supply a...