Dee Mosher

I'm not 100% sure what causes this error. It appears to usually occur if the tool gui width is changed when it's too narrow to see all the gui elements.

Building using WSL works for me, so I assume the problem is because of Path format and/or Windows can't run .sh out of the box (Git for Windows adds integrations...

>Steel Batalion I would like to know this too, actually.

@philfung @ywiyogo Before editing the CAD file, you may want to try changing the [XY hole/contour compensation settings](https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation) in Bambu Studio.

> Testing with the Gauge Zero also fails. Does "Gauge Zero also fails" mean "the gauge doesn't fit the motor" or fails as in "the gauge does fit the motor,...

Have you tried the [Seeed Studio mounting plate](https://github.com/TheRobotStudio/SO-ARM100/blob/main/STEP/SO101/Seeedstudio_Mounting_Plate_SO101.step) ([STL](https://github.com/TheRobotStudio/SO-ARM100/blob/main/STL/SO101/Individual/Seeedstudio_Mounting_Plate_SO101.stl))?

If you are following the Bambu Studio Quickstart guide, [they explain how to do so here in step 2](https://wiki.bambulab.com/en/software/bambu-studio/studio-quick-start#select-printerfilamentprocess-presets). If PETG isn't an option, you probably didn't set it up...

If I remember correctly, Prusaslicer loads STL files with the same orientation as the STL file, not necessarily the optimal orientation for printing. The way you reoriented the part seems...

@pkooij I'm requesting to close the issue since its content is irrelevant to the repository.

If you don't need to print parts individually, I suggest using one of the files in https://github.com/TheRobotStudio/SO-ARM100/blob/main/STL/SO101/Follower. These appear to contain all the parts laid out for printing. When I...