ctzsnooze
ctzsnooze
Hi Mathias - thanks for getting back to me! Here is an image with Bluejay 0.14 in 48k mode. I hacked the log viewer so I can see the whole...
We couldn't say that the linear PWM at 24khz is much of an improvement, but it perhaps suggests that the reason for the steps at the top come from something...
@mathiasvr Happy to test whatever you come up with.
I repeated the tests with 0.16. Same abrupt, non-linear steps in RPM at high throttle. Left is 24kHz, right 48kHz. Easy to make the logs. Get 4.3 RC or nightly,...
@limonspb Are you still actively proposing this PR? Am I right in understanding that the intent is: - when racing, the low battery warning is common - because of this,...
I doubt that alt hold would add an appreciable amount of code. We already calculate altitude. We already have that code.. Altitude hold, from that data, only need a fairly...
Profile settings can't be changed while flying, but rate profiles can. We should consider re-naming 'rate profiles' to something else that reflects their ability to be adjusted while in-flight. In...
Thanks!
@KarateBrot could you possibly make some graphics comparing square, triangle and sine wave responses for PT2, classic biquad, and Bessel filters? So that we can see what the exact differences...
I have done some detailed testing of the proposed Bessel vs the old Biquad/Butterworth and our existing PT1, PT2 and PT3 filters. The testing was done on the assumption that...