Britt
Britt
Hmm... not sure what the best implementation would be... either a compile-time switch to make G0 always behave that way; or adding a G-code to do it (G0.1???).
Also, the ESP32 is on the horizon, and it is much more powerful than the 8266.
Do a search across the source files for COREXY. The coordinate frame translations are implemented at those locations; so it would be just a matter of creating a compile-time switch...
I'm alive - but I haven't had any time to work on personal projects like this recently... and I'm pretty sure it's not gonna ease up for a few more...
Still not dead - but although it's going to take a while to get back in the swing of things, I **have** unburied some of the machines and started on...
Plasma cutter support is on the roadmap. I intend to support both up/down and analog arc voltage modes, and have a separate input for a nose-in-contact-with-workpiece sensor. I would suggest...
I've adjusted the handling of the hold state... the UI updating seems to be working now.
All updates will be made to the main repository: https://github.com/bdurbrow/grbl-Mega Just click the green "Clone or Download" button; re-download the zip; and replace your old files with ones from the...
Press your cycle start button after returning the door switch to it's normal position.
In theory, if the wires are all run in grounded metal conduit, interference shouldn't be a major problem (reflections & termination might be an issue, however). Of course, in _theory_,...