Adrian McEwen

@magman2112 pointed out that there aren't enough readily-accessible sockets in the laser-room to plug in the required number of extensions, because of #1829, so that's another nudge towards getting the...

Nice idea @zarino, but unfortunately Sheila is still using LaserCut, which requires 32-bit Windows (and we're only looking for one more socket on the wall, as we'd need an extension...

From #1990, @LizTaylor404 asked: > Also, is there any way the computer attached to the small laser isn't dependant on it starting up, and shutting down when the laser does?...

That sucks :disappointed: Do you have a link for some new fabric scissors? We should definitely get some more. A few thoughts on how we might prevent/mitigate it in future......

Presumably you mean "weren't used to cut any plastic by the Plastci Playgroup folk" @JackiePease? There are lots of people in the space, and we're probably not going to find...

I think I trust people who use the space and cut fabric over a super-fancy-predictive-text :grinning: Any thoughts on which we should get @Robotorium / Jeri?

I've ordered two pairs of those - one to be put into use, and one as a backup. Would a shadow board to store them be useful? That could then...

The right-handed scissors have arrived. I've left them on @DoESsean's desk for safe-keeping - presumably it would be useful to label them before putting into use? I've also ordered one...

The left-handed scissors have arrived too. They're all with @DoESsean at the moment.

Made a start on this today, and tested the heatpresses and most of the rest of the stuff on the same worktop. Need to test the printer and the extension...