adophoxia

While most of the changes done need to be done on future Q boards, will they also be necessary for boards already in the repo like the Q1v1 and Q2?

> I was able to fix this by adding a proper definition of the encoder to the via json: > [Q6_UK_ISO_Knob_V1.2-mod.zip](https://github.com/qmk/qmk_firmware/files/9842171/Q6_UK_ISO_Knob_V1.2-mod.zip) > > Result: >  > This was because...

Is there anything else needed besides resolving merge conflicts and having it successfully run the QMK CI to have this be on the way to being merged?

Ah ok. That's actually good to know.

Don't know how, but you guys forgot to specify both, the MCU and bootloader, in `info.json` which is causing the CI to fail. 🙂

Bit curious about this board. @jonylee1986, is the firmware from this PR for the 5075S that's already being sold on [Akko's website](https://en.akkogear.com/product/5075s-kit/) or this for a different variant?

@nuphy-src, it's how it should have been from the start, so it's ok

I'd hope this is the only PR for this board cause if this were to be closed and a new one is opened that is the exact same as this...

@Epomaker > However, I have found that the merge operation is currently restricted, and only authorized users can perform it. This will only be for people like the collaborators like...

> Can I ask what the reason for the split keyboard configuration is? This does not seem to be a split keyboard based on product info. The kit that includes...