Alex Wierzbowsky
Alex Wierzbowsky
On a computer with 2 floppy disk drives (or Gotek + FDD drives: Yamaha YIS805/256 for example) and an IDE-capable device like Carnivore2 or FDD/IDE controller with IDE driver 0.1.5...
Carnivore2 starting from v2.30 (firmware + boot menu) no longer works with some CF cards after upgrading to Nextor v2.1.0 Beta 2. With Alpha 2 version of Nextor everything works...
When using Carnivore2 with Nextor 2.1.0 Beta 2 (IDE driver 0.1.5 or 0.1.7) in slot 1 of MSX2 computer (Yamaha YIS805/256) and FDD/IDE controller with Nextor 2.1.0 Alpha 2 (IDE...
I've tested the Maxiol CF-IDE controller and there every non-hidden partition is mounted to a drive on bootup. Nextor doesn't do this automatically - a user has to manually mount...
A computer without a floppy disk controller requires purchasing an additional cartridge that offers IDE or FDC functionality. I would recommend to add a simple floppy disk controller (TDC-600 or...
As you offer v9958 installation, it could be good to offer an upgrade option to MSX2+. This will require port F4 and FM-PAC mono functionality. The FM-FAC SRAM option could...
I would recommend to implement an optional FM-PAC mono functionality on the board. Or to create a socket for an optional FM-PAC daughterboard.
On most of MSX computers the Stop button is large and is located in the upper right corner of the keyboard. In your design the Stop button is indistinguishable from...
During the FF OSD porting to MSX the Blinker test (blinky-test-f1-1.2.hex) had no output from Blue pill via serial interface. Then @keirf informed me that: No blinking led is bad....
I am not sure whether this is actually a bug of Nextor or something else. I've identified that with Nextor 2.1.1 installed on Carnivore2 in default configuration a system (MSX2+,...