Alex Wierzbowsky

Works fine in Carnivore2 with v2.50 firmware.

Carnivore2 doesn't have any drivers. It uses the Sunrise-compatible Nextor BIOS version AS IS. With Alpha2 version the CF cards work without a problem. When upgraded to Beta2 version, some...

Nestor, I am Wierzbowsky, the coordinator of RBSC and I write software for Carnivore2 cartridge. We don't have any drivers of our own. There is FPGA firmware, Boot Menu (for...

From what I see - the "Nextor-2.1.0-beta2.SunriseIDE.emulators.ROM" uses the older IDE driver v0.1.5 that was previously used in the "Nextor-2.1-alpha2.SunriseIDE.ROM", at least the versions match. The experimental driver 0.1.7 is...

We are making the QVL for various CF cards and SD-CF adapters. It looks like some of them work with v0.1.5 but don't work with v0.1.7 and vice versa.

The QVL document is WIP (work in progress), the community is helping to add more data. When done, it will be added to the Carnivore2's repository: https://sysadminmosaic.ru/msx/carnivore2/qvl_list-en

We collected quite a lot of info on different cards, thanks to the help from the community. Looks like some cards only work with 0.1.5 driver, some cards work only...

There's always a master device, never a slave (Carnivore2 doesn't support slave devices). The master device is almost always detected correctly, but sometimes driver version 0.1.7 detects the non-existing slave...

Carnivore has a single slot for CF card and no pins for slave devices. With driver v0.1.5 the slave detection never happens. There's only one CF card that doesn't work...

Usually when an error is shown for the slave device, the master device stops working as well. So a computer boots to Basic and with the "files" command you get...