Snapmaker2-Controller
Snapmaker2-Controller copied to clipboard
Snapmaker
Snapmaker2-Controller is the firmware for Snapmaker 2.0 3-in-1 3D Printers.
I would like a button to move the machine back to the work origin (not home)
When I run Auto-Z-Calibration on the DX head (I *like* this feature!!!), since Firmware 1.15.19 the result is that the print starts about 0.3 mm too high, which I then...
When setting a temperature using the left-right slider on the touchscreen, large ranges of numbers must quickly scrolled through to land on a specific value. All the values are the...
While a job is running, I would like to turn off door detection the same way I can deactivate the LEDs or the Fan. When a Job starts, the initial...
Field of application: CNC Context: PCB engraving request very precise zeroing (at leat 0.05mm precision) Problem: UI only allow to move the toolhead by 0.1mm steps (using 0.1mm button) Request:...
Steps to reproduce: 1. Start luban 2. Connect to SM machine via Wi-Fi 3. Send some gcode file 4. Disconnect 5. Start printing/laser/cnc job from touchscreen 6. Connect Luban to...
Running the calibrations all is ok untill i get to xy offsett calibration. The first extruder prints fine. The second starts fine but when printing the prime line it will...
See [Marlin docs > gcode > M21](https://marlinfw.org/docs/gcode/M021.html). Setup: I have the Snapmaker 2 A350, configured for 3D printing, connected over USB to an Octoprint server (on a Raspberry Pi 4)....
https://github.com/Snapmaker/Snapmaker2-Controller/blob/13e410d4bf97e15a855d378d2da6240db979e4a6/Marlin/src/gcode/bedlevel/abl/G1029.cpp#L114 The code is specifically disallowing this command from being executed against the dual extruder. Is there a plan to resolve this so we can do an 11x11 grid if...
Im using cura plugin to send models to snapmaker but the luban connection is also very unstable. Sometimes printer does not show upload progress, sometimes it gets in some weird...
