Snapmaker2-Controller
Snapmaker2-Controller copied to clipboard
Snapmaker
Snapmaker2-Controller is the firmware for Snapmaker 2.0 3-in-1 3D Printers.
As a avid android developer (having worked on BSP for mobile phones and other devices) I'd love to be able to tweak and play with the android version running on...
not everybody lives in UTC...
Add the capability to start a print using Luban, but having the status of the print job showing on the Snapmaker touch screen. My computer room is far from the...
Each time You touch the X+/X-,Y+/Y-,Z+/Z- on the touch panel JOG mode the required motion is added to already queued one. This results in an excessive accumulated motion without an...
The remaining time for CNC seems to be calculate excluding the last pass, so it is 100% **before** the last pass starts.
After recent firmware upgrade to Snapmaker2_V1.14.3_20220617, 3d printing calibration data are being lost on reboot. Here is console output when we calibrate machine, then enter M501, M503 and them M1999...
Hello. I used to monitor prints that I'd start from the machine in Luban and a custom made app that would fetch the status from the machine. The latest firmware...
Printed this in a Snampaker 2.0 a250 using PLA after doing a 5x5 point calibration from the display (max calibration mesh from display). It's easy to see that something is...
Laser 10w, run file, after auto levelling choices, while setting work origin press home option on touchscreen, then start job, it starts in midair (at least wrong Z) even though...
When calibrating the 10W laser tool head to the work bed (using the provided calibration card), my resulting laser height is typically in the 30.7mm to 30.8mm range. Whether I...
