Ben V. Brown
Ben V. Brown
>However, there are still big questions about whether the Pinecil V2 can handle 5a current and how to change the profile. So, in _theory_ it could handle the 5A. What...
>So if I've understand correctly for example with 12V 4Ω in theory it can deliver 3A but if the power supply is max at 12V 1,9A it should ask for...
Completely a pot-shot, but you could try this and see if the tip resistance shows up as 4 ohms. (And then test carefully, at your risk as I haven't tested...
So this is a _pain_. From what I recall from this last time it was the cloned LIS2DH12's that sometimes get into weird states depending on the order you probe...
This was broken by TS101 support (#1695). I should have a fix for this shortly for you to test 🙇🏼
If you could try flashing the build from [here](https://github.com/Ralim/IronOS/actions/runs/8320179021) and confirm if this is fixed or not would be mint.
Ah dangit. Can you confirm if with the newer firmware the device is identified as the LIS or the LIS Clone?
Pushed updated fix, could you please test [this build](https://github.com/Ralim/IronOS/actions/runs/10129266983?pr=1894)
Please see other requests; need to know the MCU in use and its specifications before we can even guess.
Please contact the manufacturer, we are not a support forum. @teodoro31570