Ben V. Brown

Small update: Sounds like we have a go-ahead from Sequre; going to be sent a sample unit and some documentation so will try and get it up and running. >one...

@bradanlane Heads up that the sample S60 has arrived. I'll start looking into support for it now; and should get something together shortly. Sadly I'll be away for internet for...

I have spent a bit of time with the sample device. Few teething issues with the i2c hardware in the MCU used; so I'm using software i2c for now. And...

@bradanlane Very first draft test firmware (basic hardware support only). Still has some very notable issues: * Need to add movement detection * Buzzer is not used * Calibration isnt...

I shall ask, didn't realise it wasnt on their website; apologies.

Have not heard anything back from them; in the past emails where it was asked they ignored the question. I'm thinking the answer is going to be a "no" at...

Just go to actions tab, and look at any recent build for the Dev branch. All firmware is built on every commit and attached. :)

Is the device using PD or QC protocol when talking to the power bank? (Check the debug menu) If its using QC you may need to increase the settings for...

Was your device using QC or PD negotiation?

I would suggest: Power Pulse 3 Delay 3 Duration 1 This should mean that every 4 seconds; for one second it will pulse around 3W into the tip. If that...