Ben V. Brown
Ben V. Brown
Yeah, should be closed automatically when I merge that one
Closing this as it should be covered now 🙇🏼
QC cant do 28V (Spec only goes to 20V); so what is likely happening is that the PD profile is "stuck" and so therefore PD negotation fails and we assume...
>Any advice on how to investigate this problem further? Absolute best step is to get a capture of the USB-PD packets being exchanged to debug what is going on. otherwise...
I'll have a look at the capture when I get some down time -- Thank you. I'm curious as to why this isnt working given that the behaviour works on...
[Archive.zip](https://github.com/Ralim/IronOS/files/14234687/Archive.zip) Hia, Could you try this firmware version on both devices when you have time; confirm if its the same behaviour or not on them please 🙏🏼
>Still, given the resistance values of that pts200 tip, I expected to see higher peak power. pinecil v2 thinks it to be a 6.2 ohm tip. Some kind of (PD...
Hi, Can you please elaborate further? As of present QC2.0 is not supported and just QC3 is used. What is the use case? What device is this for? Why does...
No-one marked it as a offtopic; that is likely an automation from Github because of the double-post. I believe I've manually marked it to always show now.
So that looks awfully like either a bad PSU (bad regulation/poorly designed current limiting) causing resets or damage to the device. Or it could be that when the tip pulse...