Ben V. Brown

I'm very unsure then; and would really want to see what is going on with the voltages on the usb link during this. Suspect its just a quirk of the...

Can you capture what is occurring on the voltages? 2.19 vs 2.20 had a lot of changes; so would be ideal if we could _see_ the issue.

Hia, It will depend entirely on the chipset used inside. Given it looks identical to the other super cheap hotplates, I suspect it is the same thing sadly.

Well that chip is a lot better for support. Doing a port to it _should_ be possible. Would move into the category of following [Porting Requirements](https://github.com/Ralim/IronOS/blob/dev/Documentation/PortingToNewDevice.md). Specifically Note B with...

I've ordered one of these from Aliexpress to try out, and ideally add support for. ETA is like 3-4 weeks though, so 🤷🏼 gonna be a bit.

Honestly this looks like a better design than the MHP 30. Makes me less inclined to finish my designs for a competitor. Same rules would apply to this being supported...

If the default is custom; maybe default to `-- Please select version --` or some such, so you _need_ to click it to get further controls

Hia, At the moment IronOS could run on this; though porting to an ESP32-S2 target will require a fair bit of work to get the esp-hal to work in the...

If we make a CLI, would love some form of a "watch" mode, where it will program any device connected, with the latest file its pointed to (for custom), so...

I have no issue with the PR; I'll test on hardware this week (nag me if I dont get back to you)