Prusa-Support

The use of third-party components is not directly supported however, as speculated on https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3764, our developers are already making their considerations about this. Michele Moramarco Prusa Research

Thanks for the patience but this is a third-party component not directly supported by us on this printer model. We would need E3D to contact us and set in place...

Thank you all for your input. Our developers are investigating this but we couldn't reproduce the problem so far. Please let us know if downgrading firmware or disabling the network...

The problem is mentioned as a known problem in the most recent release notes [FW 6.0.0-xl](https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v6.0.0-xl) as the release for Prusa XL was slightly deferred, but this is also valid...

Please allow me to close this issue in favor of https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3982, which is a duplicate but provides a more complete piece of information, and covers "more use cases". Michele Moramarco...

The fix was merged at the end of April and made available with the firmware release in May, so that adding a [Dwell code](https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/1075#issuecomment-1955316303) is no longer needed. This should...

Thanks for sharing. I believe this behavior was inherited from "MK3's firmware" actually. https://github.com/prusa3d/Prusa-Firmware/issues/3670 Our developers will look into this. Michele Moramarco Prusa Research

Thanks for testing and reporting. For clarity, it seems that the print in the first picture doesn't match the .gcode file prepared in Prusa Slicer. The Prusa Slicer G-code was...

Thanks for your feedback. @posen4u It seems safe to rule out the MK3-series from this issue. @elHatchling Isn't it that BondTech Heatbreak requires a few firmware parameters and print settings...

Thanks for the heads up. It seems the feature was accidentally removed from the UI. This will be reported to our developers. Michele Moramarco Prusa Research