Prusa-Support

This seems to be an issue specific to your system/hardware. Unfortunately, we are unable to help with this issue. Marek Micek Prusa Research

Hello! I tested it at this moment with Fusion 360 on PC and was able to open that file regularly, can you please attempt it that way? Let me know...

@Devilscave Have you checked the latest R7 parts if you still have the same issue? The x-carriage and x-carriage-back parts were slightly modified to minimize any possible excessive pressure on...

Hello @Devilscave, thank you for the response. Fair point about the possible higher pressure, in my experience I haven't noticed issues stemming from the new R7 part but let me...

We are in the process of adding those files but it can take some time. Please bear with us. Marek Micek Prusa Research

Hello! I am sorry this hasn't been answered for a long time. I added the tag "enhancement" so that our devs can take a look and evaluate this in the...

Thank you for reaching us. This part was designed with PETG material in mind and tested with it. Materials like ABS/ASA have substantially different characteristics. PETG offers good dimensional accuracy...

I believe this issue can be closed now. This may seem to be a problem of printing, that could be solved through a proper troubleshooting session, and it is not...

Thanks for the heads up. Credits are stated in the printer's manual but we wouldn't mind adding more credits. We will consider doing that. Please close the issue if you...

Noted, thanks. I'm collecting relevant information and forwarding it to the competent team. Michele Moramarco Prusa Research